At SenYan, standard PCB services refer to full-featured printed circuit board manufacturing services. With over 10 years of PCB manufacturing experience, we have handled hundreds of thousands of PCB projects covering almost all types of substrate materials, including FR4, aluminum, Rogers, etc. This page covers only standard FR4-based PCBs. This page only covers PCBs based on standard FR4. for PCBs with special technical substrates, please refer to the corresponding pages for information.
Unlike our prototype PCB service, our standard PCB service has tighter production tolerances. The following two articles will provide you with sufficient information on the introduction and differences between these two services.
- PCB Prototyping vs. Standard PCB Manufacturing Services
- When to use PCB Prototyping Services and when to switch to Standard PCB Services
When your design is ready to move from the prototype phase to the production phase, it is recommended to use the standard PCB service. We can manufacture up to 10 million high-quality PCBs in as little as 2 days, and to give your project the desired functionality and more possibilities, we offer the advanced features of our Standard PCB Service.
|1||Material||CEM-1, CEM-3, FR-4, Aluminum, Rogers, high Tg etc.|
|2||Board thickness||Mass production: 394mil(10mm) Samples: 17.5mm|
|3||Surface finish||HASL, OSP, Immersion Gold/Silver/Tin, ENIG, Gold Finger|
|4||PCB Max panel size||1150mm × 560mm|
|6||Min hole size||Mechanical drill: 6mil(0.15mm) Laser drill: 3mil(0.075mm)|
|7||PCBA QC||X-ray, AOI Test, Functional Test,QC, QA, QE|
|8||Special Process||Buried Hole, Blind Hole, Embedded Resistance, Embedded Capacity, Hybrid, Partial hybrid, Partial high density, Back drilling, impedance requirement, and Resistance control.|
|9||Our service||PCB manufacturing, Procurement of Components, SMT/DIP PCBA assembly, Line and functional test, Installation, OEM service|
|10||Sanforized||Buried via, Blind via, Mixed Pressure, Embedded Resistance, Embedded Capacitance, Local Mixed Pressure, Local High Density, Back drill, impedance control.|
|11||SMT Capacity||700Million Points/Day, BGA 01005|
|12||DIP Capacity||0.5Million Points/Day|
Q: What files do you use in PCBA fabrication?
A: Gerber or Eagle, BOM listing, PNP and Components Position
Q: Is it possible you could offer sample?
A: Yes, we can custom you sample to test before mass production
Q: When will I get the quotation after sent Gerber, BOM and test procedure?
A: Within 6 hours for PCB quotation and around 24 hours for PCBA quotation.
Q: How can I know the process of my PCBA production?
A: 7-10 days for PCB production and components purchasing, and 10 days for PCB assembly and Testing
Q: How can I make sure the quality of my PCBAs?
A: We ensure that each piece of PCBA products work well before shipping. We'll test all of them according to your test procedure. Also if there are any defect items during the shipping, we also can be free to repair for you.